- stainless steel fibers
- Iron-chromium-aluminum fibers
- Other metal fibers.
The non-woven sheets are formed by air-laid process, and sintered under high temperature with our proprietary sintering process.
- Pleatable high permanence media
- Excellent high temperature resistance
- High pressure resistance
- Corrosion resistance, etc.
Standard size: 1180*1500 mm, also can be customized
Standard form: single-side or double-side covered meshes
We mainly provide the following four kinds of product, for other demands,please contact us!
Product NO.1 Normal pressure sintered metal fiber felt/sheet
With multi-layered structure and high porosity, this class of products has a high dirt holding capacity and long on-stream service life.It is suitable for various polymer filtration, and be pleated into cylindrical filters or spin packs.
|Grade||Filtering Rating (μm)||Weight (g/m²)||Thickness (mm)||Porosity (%)||Air Permeability (l/dm²·min)||Bubble Point Pressure (Pa)||Dirt Holding Quantity (mg/cm²)|
Product NO.2 High dirt holding sintered metal fiber felt/sheet
This product has a high dirt holding capacity, high porosit and multi-layered structure. It is suitable for low-pressure filtration and plastic monomer filtration with a need for high dirt holding capacity.
|Grade||Filtering Rating (μm)||Dirt Holding Quantity (mg/cm²)||Weight (g/m²)||Thickness (mm)||Porosity (%)||Air Permeability (l/dm²·min)||Bubble Point Pressure (Pa)|
Product NO.3 High pressure sintered metal fiber felt/sheet
This sintered metal fiber felt can’t be compressed distortionally even if used under high-pressure condition, and very suitable for making folding column filters and discs. This product can be used in extrusion molding of film and fiber, filtration of polypropylene and polyester fusant.
|Grade||Filtering Rating (μm)||Bubble Point Pressure (Pa)||Weight (g/m²)||Thickness (mm)||Porosity (%)||Air Permeability (l/dm²·min)||Dirt Holding Quantity (mg/cm²)|
Product NO.4 High temperature resistance sintered metal fiber felt/sheet
This sintered metal fiber felt is made of iron chromium aluminum metal fiber felts with excellent high temperature resistance and strong oxidation resistance. It can be continuously used under a temperature up to 1100℃. It is mainly used in filtration of high-temperature gas, car exhaust, gas oven, ect.
The following table showing 316L mesh available
|Note: *Calendared mesh|
- Bubble point pressure determined according to ISO 4003;
- Average air permeability determined according to ISO 4022;
- Dirt holding capacity determined according to Multipass method ISO 16889, different pressure=8 times as initial differential pressure.